PRETREATmaker Basic is a low-end model to pretreat textiles for Direct to Garment Printing.

The PRETREATmaker Basic is equipped with one nozzle. The maximum spray area is 40 cm in width and 45 cm in length. Width cannot be adjusted but length can be regulated in 9 steps (5 cm intervals). With the beginner model the user can spray uni- and bi-directional. Spray output can be regulated with the speed of the carriage.

The machine does have a big side wall that can be opened for interior cleaning. The unit does come with 3 tanks (2 x 2 L Precoating, 1 x 2 L Cleaner or Water). With a switch valve it is possible to change between the different tanks.

The unit does have a drain for excess precoating liquid in the back. The waste tank volume is 2 L.

Specifications

Spraying area      40 x 45 cm

Spraying method     Nozzles are moving over the table (inside)

Table length     62 cm Nozzles      1 piece

Dimensions     T 70 x B 52 x H 56 cm

Dimensions  (transport)     T 80 x B 58 x H 73 cm Weight      38 kg

Weight (transport)     47 kg

Connection     220/230 or 110/120 VAC (automatic switch)

Consumption     150 W

Operating pressure (precoating)    max. 7 bar

Menu      5 languages: German, English, French, Italian, Polish      measure: „cm“ or „inch“

Included in delivery     replacement nozzle, replacement filter and ultrasound cleaner

Additional characteristics    zinc- and powder-coated housing